Go to
Online
Store
Synthetic
Motor
Oils

Synthetic
ATF
&
Gear Lube
Oil
&
Air
Filters
Industrial
Lubricants


Car
Care
Products

Field tests
&
Testimonials
Compare
Amsoil
Retail
&
Commercial
Accounts
Free
Catalog


SYNTHETIC OGC OPEN GEAR COMPOUND

  • NLGI #1

  • AGMA 14R

PRODUCT DESCRIPTION

AMSOIL Synthetic Open Gear and Wire Rope Compound (OGC) is based on proprietary technology resulting in a lubricant that does not use asphaltic materials, residual compounded oils or solvents as diluents. OGC is a heavy lubricant and protectant formulated with a very thick synthetic base oil and silica thickeners. OGC is tacky, providing excellent adhesion to surfaces, resistance to water washout and protection against rust and corrosion.

OGC's high viscosity base oil has excellent firm strength for slow-moving, high-load applications. This product protects equipment operating under boundary lubrication conditions and in hostile environments. OGC clings tenaciously in conditions where conventional asphaltic gear compounds fall short. OGC's affinity for metal surfaces and adhesion properties allow it to stick to dirty or otherwise poorly prepared surfaces. OGC does not flake off in cold temperatures or drip and run off in high temperatures. OGC stays in place when subjected to water and in many cases will reduce relubrication frequencies.

PERFORMANCE FEATURES

  • Excellent resistance to water washout

  • Environmentally preferable to solvent-cut products

  • Protects ferrous surfaces from rust

  • Excellent adhesion to metal surfaces

  • Forms a tacky, tenacious film

  • Stays pliable at cold temperatures and does not flake off surfaces

APPLICATION RECOMMENDATION

AMSOIL OGC may be applied by automatic dispensing equipment, hand brushing/swabbing or caulking. OGC is ideal for use on exposed heavy equipment and machinery components such as mining and dredging bull gears and dipper sticks, outside surfaces of wire ropes, power shovels, chains, flexible couplings, slow-moving bearing surfaces, and fifth wheel applications. OGC meets AGMA 14R and is recommended for applications identifying this specification.

Apply and adequate amount of OGC, ensuring good lubrication and thorough coverage of all mating surfaces. Relubrication intervals are based on environmental conditions and use. Manufacturers' recommendations and observations of surface conditions will help establish correct amounts and lubrication intervals.

AMSOIL LIMITED WARRANTY

AMSOIL PRODUCT AVAILABILITY

AMSOIL Synthetic OGC is available in 11-oz. cartridges and 35-lb. lugs.

AMSOIL Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on customer requests and regional demands.

TYPICAL TECHNICAL PROPERTIES

Synthetic OGC Open Gear Compound

NLGI Grade 1
Penetration, unworked 315-325
Thickener, type silica
AGMA 14R
Water Washout - ASTM D-1264 (79°C (175°F), % loss) <5
Rust Test - ASTM D-1743 pass
Oil Viscosity

212°F, sus

100°C, cSt

 

2700-3100

579-665

Dropping Point, °F none
Color black
Texture adhesive/tacky
Odor bland

AMSOIL Industrial Products Index Page